9x20mm Browning Long brass
Can Browning long brass be formed from any other brass or is anyone making the brass or ammo?
0
-
9mm Browning Long is a straight semirimmed case.
It can be made by shortening .38 Super from 23mm to 20.
Ammunition is available, note that it is old issue, corrosive Berdan primed.
http://www.samcoglobal.com/Ammo-9mm-browing.html0 -
"It can be made by shortening .38 Super from 23mm to 20.'.............well, as the .38s is semi rimmed you MAY run into a problem. I would also look at the 9x23 or 9mm largo. 0 -
To quote a usually reliable source (ME!) the 9mm Browning Long is a semirimmed straight case like the .38 ACP/Super. Just shorter.
CotW shows rim and body diameters only .001" apart, length .10" shorter.
Not rimless tapered like Largo.0 -
If the semi-rimless case is a problem and it shouldn't be as the 9MM Browning Long is semi-rimless too, you could start with the rimless 38 super brass that is out there. 9MM Largo has to much taper about .009. The 9MM Browning Long has a little taper only about .002. Personally I would just shorten Remington 38 super brass. Should work fine. 0 -
they are some 38 amu / 9mm basic bertram listed that you can form or trim to work 0
Please sign in to leave a comment.
Comments
5 comments