9mm handloads 100 gr plated

cjm3422

June 17, 2013 17:49

hey guys, i need load data for x-treme copper plated 100 gr for 9mm. i can find the data for 380 which is a normal weight but nothing for 9mm. I will also need the OAL if anybody has data for this round. i will be shooting it out of a glock 19. any help would be appreciated.

0

• 

  dcs shooters

  June 17, 2013 18:52

  Try the starting loads for FMJ bullets
  The SFIRE might be lead as the GRS of powder is lower, of so se that data.
  
  http://data.hodgdon.com/cartridge_load_1.asp

  0
• 

  rufe-snow

  June 17, 2013 18:58

  Using standard 9mm, 115 grain data. Increase the powder load from 1/2 to 1 grain. Lighter bullets are a shorter overall length as compared to the normal 115 & 124 grain 9mm bullets. Load the 100 grainers so that the case can be taper crimped on the closests parallel surface to the forward part of the bullet.
  
  I wouldn't sweat any loads for plated bullets, as they are meant for plinking, target practice etc.

  0
• 

  cjm3422

  June 18, 2013 14:59

  ok guys, i will try some of the pointers. thanks alot for the info.

  0
• 

  andrewsw16

  June 18, 2013 15:58

  Steve's Pages has lots of loads for 100gr 9mm. The plating on Xtreme bullets is so thin you can just use the same loading data as for cast bullets.
  
  http://stevespages.com/355p_4_100.html

  0

Please sign in to leave a comment.