Skip to main content
Help Center Community Shop

1100 rem wont eject

o b juan
It has been in closet 22 years
took down completly
replaced gas rings
repladced fork that goes into stock
cleaned the 2 tiny holes
cleaned everything.

Load 2 in fire no eject6 pul back bolt handle and empty comes out like it should

Any ideas?? Thanks for any help offered
0

Comments

10 comments

Date Votes
  • duckhunter
    Oil the out side of the mag tube. Use heaver loads.
    0
  • o b juan
    tried 3 and1/4 ==1 1/4 no workee

    I thought from all I ever read we werent supposed to put oil there. Thanks
    0
  • o b juan
    I am wondering if it could possibly be the spring that is in the stock in a tube?
    I have not a clue of how any thing could go wrong with that..
    0
  • perry shooter
    O ring broken EDIT it has the same problem I have had all my life Short stroking did you check that BOTH of the gas ports in the barrel are not blocked[?]
    0
  • SwanKong
    quote:Originally posted by o b juan
    I am wondering if it could possibly be the spring that is in the stock in a tube?
    I have not a clue of how any thing could go wrong with that..


    They can bind if they are too dry...
    0
  • o b juan
    I replaced all the gas rings with new ones from brownell
    0
  • AmmoRat
    1100's use a pretty simple gas system. You haven't said whether your 1100 is a 3" and your firing 2 3/4" shells. An 1100 magnum will not work with a low brass 2 3/4" shell. Another thing to check is if you have the o-ring and the metal gas ring in the right order on the magazine tube. If they are backwards it wont work.
    0
  • ap55
    Check chamber and clean lots of times plastic sticks pretty good.Isn't there a certain way that the gas system goes back together were you can put it together 2 ways? Its been 10 yrs last time I took one apart.
    0
  • gruntled
    Broken O ring or put together wrong. Mine has a picture of how to assemble it but that is starting to curl up & could be missing. I've had mine for around 45 years & have had to replace the O ring.
    0
  • o b juan
    I made a mistake in my original post.

    I havent shot a 3 1/4 1 1/4 until today and it worked gunsmith told me to try 3 dram 1 1/8

    I have tried 3 1/4 1 Oz and it does not function
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?