Winchester 94/22

Geri

April 05, 2013 08:15

94/22 mag. Locks in the open position, have to disassemble to free up.
Very clean. Owner states has not been fired very much. Any suggestions? Thanks

Comments

5 comments

Geri

April 05, 2013 08:15
will the receivers on these rifles reblue?
i know the post 64's will not
0
charliemeyer007

April 05, 2013 13:06
http://www.gunpartscorp.com/Manufacturers/Winchester-33573/Rifles-42602/94Series-40353/94-22Series-34348/94-22M-34375.htm?results=All

I'd be looking at part# 45 and 46.

The right cartridge guide on my 94AE was cracked in the screw hole. I drilled it out, installed a bushing and re tapped to original thread. Still need to weld in an extension on the lifter.
0
toad67

April 05, 2013 17:26
Does it make a difference whether it has just been fired or just working the action?
0
Geri

April 06, 2013 04:57
Just trying to work the action. I think it may be the finger lever arm. bent?
0
CS8161

April 06, 2013 20:23
Are all the screws in the receiver tight?
0

Please sign in to leave a comment.