Skip to main content
Help Center Community Shop

Broomhandle Mauser bolt hold open

wwiiman
I am looking at a broomhandle mauser trying to figure out what to offer for it
it has some features I cant find on any other gun
this example has a bolt hold open installed on the left side of the gun it is a round knob you push in to hold the bolt open it is spring loaded and you just pull it out a little and the bolt releases
also the front sight has a ramp added to it and it says King Pat. Pend. on the right side of it looks like it is slid around the original sight with 2 pins holding it on
the gun is all matching except for the grips which are checkered factory grips but not right for this gun
the serial is 421XXX
Thanks for any help
0

Comments

10 comments

Date Votes
  • rufe-snow
    From your description it's not factory original. This would have a negative effect on it's collectors value.

    The two features you describe seem very interesting though. Is it possible to post quality photos showing them. Even if not original the quality of their workmanship would likely affect the value.

    EDIT #1, The serial number puts it in the post W W I, commercial range. Mauser made very substantial numbers of broom handles during the 1920's.

    As far as the current condition is concerned, and the reworked sight and bolt lock. These would be a negative as far as a BH collector would be concerned, IMHO.

    Personally I wouldn't be offering a lot of money for a non factory original BH. That would be nothing more then a interesting conversation piece. Since BH's are ugly unpleasant pistols to shoot if you not familiar with them, I wouldn't even consider it a shooter.

    EDIT # 2, In light of condition with surface rust and aftermarket alterations, i.e. bolt lock and front sight. Just a wall hanger/conversation piece. $400-$600, IMHO.
    0
  • perry shooter
    There are many different variations of these pistols some even made inother countries There was even a Full auto version.we need pictures It took me years to learn how but easy once you get the hang of it we are always interested in seeing different models.


    EDIT The king sight used a mirror set at 45 degrees to use available sun light to reflect onto the back of the front sight. very innovative. Idea of long ago . The over all outline of your pistol for some reason makes me suspect it is NOT made by MAUSER. I would love to do a hands on inspection. The hammer looks non Mauser also can you take close up of the pistol from the back also top of receiver with hold open engaged and are there any serial numbers on the hammer or rear of receiver? ARE YOU going to sell or keep? Thanks Perry Shooter
    EDIT II for pictures we would like in focus pictures of the grip logo. I have never seen a Mauser with as little proof marks ETC. Would like to see any and all numbers letters Proof marks dates ETC. I looked at pictures of some other items are these from the same person [?]
    EDIT III
    Your profile has a defunct email address [V][?][?][?][?]
    0
  • p3skyking
    With English or American Pat Pend parts added, it cannot be a good thing for either collector or value.
    Shooter or parts value only.
    0
  • Hawk Carse
    Sounds like a relic of a bygone day when people bought guns to shoot and not to show off. Of course the dollar value to a collector or speculator is less, I can't say by how much.

    It would be interesting to see pictures.
    King's made replacement sights for about every firearm on the market.
    A holdopen would be convenient for loading the gun with loose ammo, no stripper clip at hand.

    How neat.
    The King Reflector Ramp was the high end sight of the times, long before radioactive tritium night sights.
    I have never seen the like of the holdopen. I suspect it is a gunsmith one off or one of a few. An ingenious solution to loading a Mauser without stripper clips.
    I think the checkered hard rubber grips are legitimate Mauser, just less common than the usual grooved walnut.
    0
  • wwiiman
    here are some pics
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5547.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5546.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5545.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5544.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5543.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5542.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5541.jpg
    0
  • wwiiman
    I will make more pics of it later
    what should I offer for the pistol
    0
  • Kenneth Stuart
    Ask to shoot it first, they tend to be very picking with commercial ammo. My 9mm (9X19mm) Bolo jammed a lot. Always, felt that since it was designed originally for the bottle-necked 7.62X25mm (30 Mauser) the problem was partially due the slightly tapered and shorter 9X19mm. If it shoots without jamming - great. We already know it isn't collectable so next ask about the pistol's history - its history might have some interest value. Although by itself it is an interesting semi-automatic pistol designed in the later part of the 19th century. Now, my offering price would be based on what your average used 9mm auto goes for plus any historical interest value if any - you'll be the judge of what this is worth. I bought my 9mm Bolo for $600 about ten years ago; and bought it because it is an interesting design. One thing, I should warn you about - do a lot of research before taking it apart (no screws except for the grip screws) and if not reassembled correctly - you'll be in a lot of pain/grief/regret/remorse/etc. - I was very careful when I first attempt to disassembly mine and I read the instructions over an over again - I was successful but there is history of those who were not.
    0
  • wwiiman
    here are more pics of the mauser also i think it is chambered for the .30 mauser round
    I have taken it apart and all the internal parts are matched to the serial number and yes it did take me about 30 mins to put it back together
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5554.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5553.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5552.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5551.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5550.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5549.jpg
    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5548.jpg
    0
  • wwiiman
    bolt hold open button


    http://i336.photobucket.com/albums/n348/wrmoore2004/IMG_5563.jpg
    0
  • wwiiman
    I bought the Mauser broomhandle today for $500
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?