Unertl Hawk 4X questions

Hook

March 07, 2013 05:16

I need help. I have a Model 70 Win with an Unertl Hawk on it. I have not shot the gun so I don't know if the scope is "on" or not. The adjusting knobs do not have directional arrows on it. IS COUNTERCLOCKWISE FOR "up" AND "right"? What are the screws, adjacent to the adjusting knobs for?? Locking in the settings after you've zeroed? Thanks in advance for your help. Stan Yates Stancyates@gmail.com

0

• 

  chris8X57

  March 07, 2013 05:59

  My Unertl Hawk is marked 'Up' with a counter-clockwise arrow. 'L' is marked with a clockwise arrow.
  The screws adjacent to the adjustment knobs are the mounting screws for the adjustment boss assembly, and do not lock the adjustment screws.
  
  The Hawks did not have a permanently centered reticle, so as you make adjustments to windage and elevation, the reticle moves out of center of your sight picture. Get your scope alignment as close as possible with your mounts, and just fine tune with the adjustment knobs. (which is a good practice even with modern scopes)
  Optically, the old Hawks were excellent.
  
  Regards,
  Chris

  0
• 

  perry shooter

  March 07, 2013 06:15

  Great Glass in the UNERTL scopes. As the other poster stated crosshairs will move off center but you can get Burris rings that have adjustable offset this allows you to center the scope so that when the cross hairs are cented it is on Zero Takes some trial & error but well worth the effort.

  0
• 

  sandwarrior

  March 07, 2013 15:13

  Mine was the same as described above. As you look down on the elevation knob, turning it counter-clockwise will raise the elevation of the POI. Turning it clockwise, lowers the elevation of the POI. POI is point of impact.
  
  As perry noted, they are quite competitive scopes as far as glass and ruggedness. They are however, all, mostly or more than 40 years old and if nitrogen filled have lost that and will fog in extreme temp/wet conditions.

  0

Please sign in to leave a comment.