50 yr old brass-new in boxes
I have 60 rds of 45-70 Winchester brass. new,unprimed, but, about 50
or 60 years old. It is the thick head,(not balloon primer pocket)
They still look just as new as the day I got them.
I wish to load them with some pretty hot loads--Arisaka bolt action.
Anyone have any ideas as to condition, age softening/hardening ?
Jerry
or 60 years old. It is the thick head,(not balloon primer pocket)
They still look just as new as the day I got them.
I wish to load them with some pretty hot loads--Arisaka bolt action.
Anyone have any ideas as to condition, age softening/hardening ?
Jerry
0
-
They will be just fine. I have a small ring Mexican Mauser in 45-70 and a 600 Remington with a 350 Rem Mag necked out to 45. Both rifles are under 6 pounds. With top loads recoil can be sharp. I run cast bullets from 292 to 540 grain. Unique and IMR 4198 mostly but I have used lots others.
The 45-350 Rem Mag is my favorite grouse gun when loaded with shot. 9 grouse with 7 shots. Got two pair of doubles on the ground via careful alignment, the rest on the wing.0
Please sign in to leave a comment.
Comments
1 comment