32 S&W Long, 32 H&R Mag. , 327 Federal

ENBLOC

January 24, 2013 16:49

I've just acquired a used set of dies for the 32 S&W Long. Can I use these for 32 H&R Mag. & 327 Federal? How about 32 S&W short? This is a three piece steel die set by RCBS.

0

• 

  charliemeyer007

  January 24, 2013 17:12

  I doubt they will crimp 32 short.
  
  http://en.wikipedia.org/wiki/.327_Federal_Magnum

  0
• 

  jonk

  January 24, 2013 17:50

  yes to the long and magnum; no idea on the 327, but I suspect yes in that they are all the same diameter and not tapered.

  0
• 

  Riomouse911

  January 25, 2013 06:15

  It all depends on how much "length adjustment" threading the dies have. Seeing as there is not a huge difference in length between 32 long, 32 mag, 32 Fed, you should be good for all but the really short rounds, as the crimping/seating section might be too far up inside the die cavity for the short shell to reach.

  0

Please sign in to leave a comment.