Skip to main content
Help Center Community Shop

Springfield 1873 trapdoor model question and trigg

Comments

5 comments

  • rufe-snow
    It would be best if you could post quality photos, using the instructions at this link.

    http://forums.gunbroker.com/topic.asp?TOPIC_ID=259294

    Springfield carbines normally had 22" barrels.
    0
  • Spider7115
    It sounds like a cut-down parts gun with the wrong stock. Carbines had a saddle ring bar and a 22" barrel.

    Pics will tell the tale.
    0
  • Cheechako
    You have a carbine or a rifle with a cut-off barrel. Most likely one made from parts, as well.

    The internals of the lock are binding on the inside of the stock which is why it will not fire except when it's outside the stock. Easy to fix. Determine what is binding and relieve the wood where it's rubbing.
    0
  • Bill Jordan
    My impression that it was a made-up gun also, as the bbl is 18".& has rotational marks behind the rear sight.
    Ser # is 81989, and I know the Mantra about pics, but I still have dial-up, and loading pictures times out before finishing.
    I left a message for Al Fraska& ask his opinion as to where to start it on auction, or I might pull a "LF" and start @$.01!!!!!!!
    0
  • Spider7115
    quote:Originally posted by Bill Jordan
    My impression that it was a made-up gun also, as the bbl is 18".& has rotational marks behind the rear sight.
    Ser # is 81989, and I know the Mantra about pics, but I still have dial-up, and loading pictures times out before finishing.
    I left a message for Al Fraska& ask his opinion as to where to start it on auction, or I might pull a "LF" and start @$.01!!!!!!!

    Bill - I sent you an e-mail with my e-mail address. You're welcome to send the pics directly to me if you want. I used to collect those old Trapdoors. I had 35 of them at one time until my selfish wife wanted to buy a house of all things! [:(!][;)]
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?