A New .300 Winchester Magnum

Ambrose

February 16, 2012 06:34

I recently acquired a TC Icon (I didn't even know they made a long action!) in this chambering. Back in the 60's, I had a Rem. 1903-A3 rechambered and did some experimenting with it and will use that data as a reference. But I thought I'd ask if any one had pet loads they would care to share.

Thanks, Cap'n, I'll give that load a try. I would think that case should give good velocity to 200 and 220 gr. bullets so I'm going to experiment with those also.

0

• 

  CapnMidnight

  February 16, 2012 23:13

  I've shot a 300 Win Mag since 1969, killed a bunch of elk with it.Used this load forever, never lost an animal. I used Nosler Partician bullets for years, but have switched to Nosler Accubonds. They work just as good as Particians and they group better in my rifle, it still holds a consistant 3/4" at 100 yds.
  Start with 73gr. and work up, checking for pressure signs.
  Win LRP primer
  75gr H4831SC
  Nosler 180gr Accubond or Nosler Partician.
  I use Winchester brass.
  Enjoy your new rifle.
  W.D.

  0

Please sign in to leave a comment.