Taurus PT 1911
After all the trouble waiting for purchase permits my PT 1911 finally had its day at the range, much to my disappointment.
1.The second round fed but as the slide closed, the hammer fell to half cock.
2. After finishing a clip of 5 shots, I reloaded with another 5 shot clip, closed the slide and the hammer fell to half cock again.
3. While firing another clip, I tried to squeeze one off and the trigger reacted as if the safety was on. The hammer would not fall,
4. And most troubling is while firing a 5 round clip, three shots were expended, the gun double taped the fourth shot and emptied the clip. I shudder to thing if I had a full clip would it have run the whole clip? Needless to say the gun is on its way back to the factory. Must be a sear lock up problem.. Has anyone out there experienced this sort of trouble or heard of it?
1.The second round fed but as the slide closed, the hammer fell to half cock.
2. After finishing a clip of 5 shots, I reloaded with another 5 shot clip, closed the slide and the hammer fell to half cock again.
3. While firing another clip, I tried to squeeze one off and the trigger reacted as if the safety was on. The hammer would not fall,
4. And most troubling is while firing a 5 round clip, three shots were expended, the gun double taped the fourth shot and emptied the clip. I shudder to thing if I had a full clip would it have run the whole clip? Needless to say the gun is on its way back to the factory. Must be a sear lock up problem.. Has anyone out there experienced this sort of trouble or heard of it?
0
-
Does any one have a reccomendation for a Taurus 1911 w/ rail holster?
I am having trouble finding one that fits the weapon.0 -
If that is the statement that you got back from Taurus, that it was the sear's fault for light strikes, then you need to package that gun up and get rid of it as fast as you can. The sear, in no way contributes as to how hard or deep the hammer hits the firing pin, which in turn strikes the primer. If that is what Taurus adjusted, then they did not fix your light strike problem, and blew a bunch of smoke up your posterrior. Yet a nother BOOOO[:(!][:(!][:(!][:(!] for Taurus!
Best
EDIT 1
I do agree with you, that the half cock notch can slow the hammer down, but we are almost 3 decades past the introduction of the series 80 now. With that problem known in existance, it should be non existant in a premier model. I may sound harsh, but these type of things are common with Taurus. I did hear they had a management shakeup, so perhaps things will change.0 -
quote:If that is the statement that you got back from Taurus, that it was the sear's fault for light strikes, then you need to package that gun up and get rid of it as fast as you can. The sear, in no way contributes as to how hard or deep the hammer hits the firing pin, which in turn strikes the primer. If that is what Taurus adjusted, then they did not fix your light strike problem, and blew a bunch of smoke up your posterrior. Yet a nother BOOOO for Taurus!
I am by no means an expert but I can tell you from experience you are incorrect. On a series 80 "which Taurus is " You can have the half cock notch hit the sear and slow the whole thing down enough to get light primer strikes. Back when Colt first came out with the series 80 it was a pretty common problem. I fixed 2 or 3 myself..
If you dont believe me google it [:)]0 -
A+++quote:Originally posted by sharpshooter039
quote:If that is the statement that you got back from Taurus, that it was the sear's fault for light strikes, then you need to package that gun up and get rid of it as fast as you can. The sear, in no way contributes as to how hard or deep the hammer hits the firing pin, which in turn strikes the primer. If that is what Taurus adjusted, then they did not fix your light strike problem, and blew a bunch of smoke up your posterrior. Yet a nother BOOOO for Taurus!
I am by no means an expert but I can tell you from experience you are incorrect. On a series 80 "which Taurus is " You can have the half cock notch hit the sear and slow the whole thing down enough to get light primer strikes. Back when Colt first came out with the series 80 it was a pretty common problem. I fixed 2 or 3 myself..
If you dont believe me google it [:)]0 -
don't give up on that pt 1911. 0
Please sign in to leave a comment.
Comments
5 comments