Tightening fit of AR collapsible stock
Someone recently posted a heat or boiling method of tightening
the fit. I have a very loose one.
Could someone repost the method if it works?
the fit. I have a very loose one.
Could someone repost the method if it works?
0
-
My gunsmith friend uses a heat gun with the collapsible stock still mounted on the tube; and his method is heat uniformly and test how loose and repeat. I have never tried it so it would be best to google it and also see if someone has video on youtube too. 0 -
A couple strips of med tape on the buffer tube works good. 0 -
I pitched mine and got a stock with a friction lock. I bought a Magpull ACS-L stock a year ago, and am very happy with it. That wiggling damn stock just drove me nuts. 0 -
Are you sure you don't have a commercial stock on a mil-spec tube [?]
The commercial is .020 bigger [;)]0 -
DCS Shooter.
I'm not sure. This gun was assembled from parts by different brands.
Everything else is good.
What are the dimensions for the looser and tighter fit stocks?
I do have some slippery, braided low friction tape in mind if the heat shrink method wont look good.
I'll check U-tube.0
Please sign in to leave a comment.
Comments
5 comments