scope rings
I have 5 model 44 stevens rifles that are drilled and tapped for target scope blocks .My tired old eyes need more help than the 438 Lyman scopes that I have mounted on them . Does anyone make 1 inch rings that will fit target scope blocks ?? I don't want the barrels to look like swiss cheese plus I have more than enough 3-9's in my inventory . Regards , 637e .
0
-
this is aside mount on a marlin 336. base has a width of .347. any idea what kind of rings to use with it? thanks 
0 -
0
-
0
-
Pics rather small to tell, but look like the old Griffen & Howe; if so, will take some looking, and will be EXPENSIVE. 0 -
I agree with richarda, Griffin and Howe bases were usually held in place by three screws and two pins. The ring assembly will frequently be listed on the big internet auction. A search for Griffin & Howe should find one. Expect to pay >$150.00. The rings will be attached to the ring assembly base. They could be 7/8", 1" or 26mm.
Additional: G & H made single lever mounts (early ones) and two lever mounts. You need the two lever ones. The lever shafts fit in the two grooves running crossways in the mount. They are made to close tolerances. Two or three other manufacturers made similar mounts but none will work on your base. The ring assembly you need will have Griffin & Howe stamped in it.0 -
There are even 3/4". 0 -
thanks for the help guys. any chance another manf made rings thatll wok on thesE? 0 -
I have a Griffin & Howe sidemount on a 1928 made NRA Springfield Sporter and agree the item shown looks like a G & H mount.
Some G & H mounts can go for big bucks, but most rings & the mount can be had for about $200.00 or so. Not exactly cheap, not bad considering what you get. I suppose an alternative is using a Williams side mount. Would probably cover the existing holes and work as well.0 -
The G&H mount was three piece: the base that you show; in addition there was the mount that slid onto the base and then locked into position with levers, and then the rings which attached to the mount. I have seen rings sold separately and the base & mount as a unit, without rings; but I haven't seen the base by it self or the mount by itself; so you might have some trouble locating a mount to fit your base. 0
Please sign in to leave a comment.
Comments
9 comments