Mec Loader Part Needed

hotshot18

February 17, 2014 17:21

I am in need of the older style metal precrimp die for the 600 Jr. in 16 ga. I believe they also made a conversion ring in the early ones. I would take that if you have one. Also, if you know someone that may have one or any info greatly appreceiated.

0

• 

  mmppres

  February 18, 2014 04:07

  I have had good luck with contacting mec for rebuilding press for parts

  0
• 

  JimmyJack

  February 18, 2014 05:02

  Try Mec, they are as good as any supplier, and better tha most. Id be surprised if they cant help. They will rebuild your entire reloader for a nominal fee.

  0
• 

  hillbille

  February 18, 2014 06:56

  good luck hotshot, they don't make the metal part anymore, there is now a plastic replacement, you will also need a new bolt/stud that it hangs on, there is a small ball on the end the plastic crimper hangs on, not near as good as the metal, but that is the way it is.
  
  you may find a used one if you just have to have the metal, either way contact mec themselves they are good about customer service and may point you in the right direction if you insist on the original metal piece.

  0

Please sign in to leave a comment.