Skip to main content
Help Center Community Shop

CVA Shotgun

MrGunz22
i have a conneticut valley arms shotgun, it is a 20 gauge 3" mag single shot,full choke gun.i cant find out any information on it.i was wondering if anyone can tell me some things about it including value.i also have a remington 870 wingmaster 20 gauge with a full and modified barrel what is it worth?hope someone can help me out

hunting,its not a passion its an obsession
0

Comments

8 comments

Date Votes
  • MrGunz22
    I have a Connecticut Valley Arms/Armi San Marco single shot 20ga shotgun that my dad gave me for my 9th birthday. I have the same gun in .410 also. I had it out today doing some rabbit hunting and somehow managed to break the extractor. Does anyone know where I can find a replacement??? I would hate to have to retire this gun. Lots of sentimental value to me.

    It doesn't have a model #. From the late 1980's

    Any help would be appreciated.
    0
  • MrGunz22
    BTT
    0
  • charliemeyer007
    Doubtful you will find parts. If you have the pieces it might be fixable or at least the pattern to make one. As kid my buddy had a weak extractor/ejector single barrel shotgun. We just kept a 50 BMG bullet in our pocket, dropped down the bore it would usually knock them free. Really tight reloads required thumb over muzzle and then shake up and down.
    0
  • slumlord44
    Google CVA parts. Someone has some parts. I was able to find a new barrel for a CVA muzzleloader several years back. Don't remember where. Any good gunsmith should be able to make one.
    0
  • k.stanonik
    Might try Dixie Gun Works in Tn.
    0
  • c.shimer
    Deer Creek Products (6989 E. Michigan Rd., Waldron, IN 46182, or PO Box 246, same ZIP; phone 765-525-6181 has a lot of CVA parts.
    0
  • hillbille
    I had a cheap korean 410, do this to me once. I used one made for a winchester model 37, had to do a little filing/fitting but after hour or so I got it to work and I am no trained gunsmith. If you have no luck finding original part, take yours out and compare to others you may find something that will be close enough to work.
    0
  • slumlord44
    Deer Creek is where I got my barrel. Good people if they have what you need.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?