remington 1100 410 gauge barrel
Is the barrel real hard to remove from the Remington 1100? I can not get mine to pull out of the receiver.
May have to tape ring on barrel (part that goes around gas cylinder) with brass punch to jar loose
May have to tape ring on barrel (part that goes around gas cylinder) with brass punch to jar loose
0
-
It shouldn't be. My guess would be rust where the barrel ring fits over the mag tube; try soaking that with Kroil overnight.
Neal
EDIT: When you look at your posting, look at the top line & you will see 5 icons; the middle one has a pencil & a paper pad.0 -
the 410 was almost new, we put the barrel on it in the gun shop when I bought it. I am following instrustions to the letter and barrel will not move any. 0 -
Did you lock the bolt back first? 
https://www.youtube.com/watch?v=98QpsZbe_2w
added Take it back to the shop that put it on.0 -
Open the bolt . 0 -
bolt is open 0 -
bolt was locked back before doing anything 0 -
barrel seems to be stuck, real stuvk 0 -
Was the gun still functioning properly prior to attempted disassembly?
btw: this will be locked at ten posts. Use the EDIT post reply instead of making new posts when you reply. (that's the icon above with the pencil)0 -
quote:Originally posted by asphalt cowboy
Was the gun still functioning properly prior to attempted disassembly?
btw: this will be locked at ten posts. Use the EDIT post reply instead of making new posts when you reply. (that's the icon above with the pencil)
yes it will still shoot fine and eject, where's the icon with the pencil?0 -
you have to be logged in to see the icon. 0
Please sign in to leave a comment.
Comments
10 comments