Rem. 700 Scope Mount Holes

vandj1318

September 01, 2015 13:22

Hello All,

On a Rem. 700 Long Action, can anyone tell me what the front and rear hole centers measure c/c for 2pc scope mounts? Are they different than on the Short Action? Thank you.

Jim

0

• 

  charliemeyer007

  September 01, 2015 13:42

  cut and pasted
  Short action "C Outside to outside of rings is 4.26" for standard ring mounts. Standard rings are .63" wide and have 2 ring screws per ring. Tactical rings are .80" wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86", 3.63", .60". Height of mounts from top of receiver to centerline of scope tube is "C low .98", medium 1.11", and high 1.23".
  
  Long action "C Outside to outside of rings is 4.62" for standard ring mounts. Standard rings are .63" wide and have 2 ring screws per ring. Tactical rings are .80" wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86", 4.48", .60". Height of mounts from top of receiver to centerline of scope tube is "C low .98", medium 1.11", and high 1.23".

  0
• 

  MG1890

  September 01, 2015 17:35

  2 piece base sets fit both long and short action. Hole spacing is the same on long and short actions. Only 1 piece bases are different.

  0
• 

  vandj1318

  September 02, 2015 13:38

  Does that mean the front hole pattern is on .86 centers and the rear is on .60 centers?

  0
• 

  Ray Boone

  September 02, 2015 14:34

  quote:Originally posted by vandj1318
  Does that mean the front hole pattern is on .86 centers and the rear is on .60 centers?
  
  
  
  Yes

  0
• 

  vandj1318

  September 02, 2015 16:34

  Thank you.

  0

Please sign in to leave a comment.