What Model is this Taurus
I found parts on Numrich/Gun Parts site listed as Model 94 Small Frame.. Is this it? Did Taurus make any other 22 revolver that they designated Model 94? I am trying to find an extractor/ratchet and be sure that it is a fit.
Thanks
Thanks
0
-
This site might help you.
http://www.taurususa.com/find-model.cfm
My experiences with GPC/Numrich, in trying to order gun parts, hasn't been positive. In a number of instinctives they have sent the wrong parts. Although they have refunded my money. I had to eat the shipping charges, both ways.[xx(]0 -
Thanks for the link... I have also had some less than positive experiences with GPC/Numrich too. quote:Originally posted by rufe-snow
This site might help you.
http://www.taurususa.com/find-model.cfm
My experiences with GPC/Numrich, in trying to order gun parts, hasn't been positive. In a number of instinctives they have sent the wrong parts. Although they have refunded my money. I had to eat the shipping charges, both ways.[xx(]0 -
quote:Originally posted by gnprts
Thanks for the link... I have also had some less than positive experiences with GPC/Numrich too. quote:Originally posted by rufe-snow
This site might help you.
http://www.taurususa.com/find-model.cfm
My experiences with GPC/Numrich, in trying to order gun parts, hasn't been positive. In a number of instinctives they have sent the wrong parts. Although they have refunded my money. I had to eat the shipping charges, both ways.[xx(]
I actually stopped into their place a few months ago and was very unwelcome. They said they no longer have a store and showed me the door. [:(!]0 -
OK :
Looks like a REVOLVER to me ???
anyhow :
Taurus ( and a few others ) can be confusing bout ( older ) models !!!
Thanks !!!0 -
Yes, Taurus did make a model 94 in 22LR, and a 941 in 22 WMR. Both models were made in stainless, blue, and aluminum framed variations. 0 -
I found this pistol Item 94028154 on GB auction. Then bought an extractor/ratchet for a model 94 but is not a fit (larger)..Then using the link given to me on the forum put in my serial number which says my pistol pictured is a Model 66 made in 1986.. Not sure Taurus is correct on this.. Sure looks like a model 94 small frame to me.
Thanks quote:Originally posted by tsr1965
Yes, Taurus did make a model 94 in 22LR, and a 941 in 22 WMR. Both models were made in stainless, blue, and aluminum framed variations.
Item0 -
quote:Originally posted by gnprts
I found this pistol Item 94028154 on GB auction. Then bought an extractor/ratchet for a model 94 but is not a fit (larger)..Then using the link given to me on the forum put in my serial number which says my pistol pictured is a Model 66 made in 1986.. Not sure Taurus is correct on this.. Sure looks like a model 94 small frame to me.
Any chance the Numrich sent you the wrong part? Hate to say it, but since my problems with them. Don't have a lot of confidence, in their identification of gun parts. If they aren't actually removed, from a specific known model. They are liable to tell you anything[8]
Obviously Taurus's web site is screwed, if they identify it as a .357. Seems like the same goobers that work at Numrich, moonlight at Taurus.[xx(]0 -
Sure looks like it was made on S&W tooling to me. A k-22 star might just fit. 0 -
gnprts,
I cannot give the exact model, but I can say that Braztech/ Taurus may not want to help you with your gun, unless it has "Braztech" written on it. The serial number lookup, on the Taurus/ Braztech site will NOT give you a correct date. It appears that Taurus reused some model numbers, when they changed designs.
Who imported your gun? My Model 80 (.38 Special) has "International Distributors" written on it, and I believe that it was manufactured in the early Seventies. The Model 82 is the same, but with a heavy barrel. As the following picture shows, the Model 74 shot .32 S&W Longs:
http://www.GunBroker.com/item/594756786
)))))))))))
(((((((((((0 -
My pistol was imported by International Distributors Miami Fl too. I gave the wrong impression that I bought a cylinder from Numrich although I probably would have if it had not been out of stock. I bought the cylinder on eBay and have it in the mail as a return. I know I should have sent measurements before buying! Thanks for all the help. quote:Originally posted by BigLoop22
gnprts,
I cannot give the exact model, but I can say that Braztech/ Taurus may not want to help you with your gun, unless it has "Braztech" written on it. The serial number lookup, on the Taurus/ Braztech site will NOT give you a correct date. It appears that Taurus reused some model numbers, when they changed designs.
Who imported your gun? My Model 80 (.38 Special) has "International Distributors" written on it, and I believe that it was manufactured in the early Seventies. The Model 82 is the same, but with a heavy barrel. As the following picture shows, the Model 74 shot .32 S&W Longs:
http://www.GunBroker.com/item/594756786
)))))))))))
(((((((((((0
Please sign in to leave a comment.
Comments
10 comments