Skip to main content
Chat will be unavailable Friday July 3rd, in observance of the July 4th Holiday.
Help Center Community Shop

I.D. This Fixture

SP45
Stoning fixture of some sort. The pins are randomly placed. An A marked on this side and a B on the other. The holes go all the way through.

http://imgur.com/JabC6qK
0

Comments

10 comments

Date Votes
  • rufe-snow
    Here is a photo, of a sear/hammer engagement fixture for a 1911. Got it off the net. This type of fixture, specially if the are homemade. Could have been made for many different pistols.

    If you have a hammer & sear for a 1911. Might see if they fit on the pins?



    24d11e98.jpg
    0
  • charliemeyer007
    The pins are accurately placed for specific firearm(s).
    0
  • SP45
    No, they were not in the fixture they can be removed and placed in different spots. I just put them in for reference. Looks to nice to be home made. I thought maybe they were commercially available at some time and someone might remember it.

    quote:Originally posted by charliemeyer007
    The pins are accurately placed for specific firearm(s).
    0
  • perry shooter
    look at catalog for BROWNELL at there tools
    0
  • rufe-snow
    quote:Originally posted by SP45
    No, they were not in the fixture they can be removed and placed in different spots. I just put them in for reference. Looks to nice to be home made. I thought maybe they were commercially available at some time and someone might remember it.




    Commercially made fixture, would be marked. With manufacturers name.

    Back when I was in school, we made stuff like this. Range rods, fixtures, tools etc. It was up to you, if you wanted to mark them.
    0
  • tsr1965
    Most full service gunsmiths, have at least one lathe, and one end mill. With the end mill, and a good pair of dial calipers, and micrometers, they could spot the hole spacing, easily, for many different guns, and make their own fixtures, as professionally, and accurately as a manufactured one. Not only could they make one that worked, but they could also design it to their liking, adding features that manufactured ones left out.

    I have done this, and many old school gunsmiths have done this, as compared to the newer generation's thinking of I will go buy it, it has to be more accurate, and if they can't find one to buy, they just don't do the job.
    0
  • perry shooter
    series 80 Hammer shown [:(][xx(]e
    0
  • v35
    It's a fixture for working on sear engagement and/or trigger pull on various firearms.
    The 1911 obviously is one of them.
    0
  • SP45
    Ron Powers series II universal adaptor. Just found it
    0
  • asop
    Interesting post. Thanks for the sharing the info.[^]
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?