Skip to main content
Chat will be unavailable Friday July 3rd, in observance of the July 4th Holiday.
Help Center Community Shop

K98 guru's care to take a "shot"

Comments

11 comments

  • rufe-snow
    Ball has a photo of a late war 98 K in his book. It differs substantially from the one you describe.

    1, Laminated Stock

    2, Welded sheet metal bands. With sling swivel on side of lower band.

    3, No stock washer, but there is a take down hole in the buttplate.

    He doesn't mention, if the stock is marked?

    I think yours, with the sling swivel being on the bottom of the rear band. Points to a non German origin.
    0
  • charliemeyer007
    I had a BYF 44 rough machining marks everywhere except the bore, the working side of the: locking lugs, trigger and striker. Laminated stock, stamped floor plate etc. Shot OK. I gave it to my nephew. I traded 20 empty ammo cans for it. 10 50's and 10 30's that were like new condition.

    I have a 36 S. Very nice condition. All matching #, nice milled steel with good bluing, walnut stock. Only missing the cleaning rod. I think one of my uncles brought it back. Been in the family for more than my 60 years. Shoots really good once you learn to work a 2 stage trigger.

    In 44 and 45 I think they threw the rule book out as far a production standards.
    0
  • jetmek
    thanks guys... I thought it might be a postwar replacement stock...bummer
    0
  • b0400879
    Re: "sling swivel on the bottom of rear barrel band"
    This statement my friend: is VERY clear evidence of a post-war Balkan rework.

    Rest his soul, but Bob Balls' Mauser Rifles book is way too general & useless re K98ks - be they either early or late war.

    Ignore the stock for now, but pics of ANY German markings will tell the tale here. Start w/ the action & barrel.
    If not lam, the stock is likely an ersatz native Yugo replacement made from circassian walnut. These were flat-butted, never cupped.
    0
  • jetmek
    Ill try to figure out how to post pics tomorrow. Thanks to all your help
    0
  • jetmek
    005%20-%20Copy_zpss6qxbyp5.jpg004%20-%20Copy_zpsvioturxr.jpg
    002%20-%20Copy_zpsoo5r8g7o.jpg
    001%20-%20Copy_zps6sorytxv.jpg
    011_zpslrd5aqd1.jpg
    010%20-%20Copy_zpsc6xwpeff.jpg
    009%20-%20Copy_z008%20-%20Copy_zps4uobgmyr.jpg
    007%20-%20Copy_zpslhdydt1c.jpg
    psrwrhzvz9.jpg
    0
  • jetmek
    one more
    009%20-%20Copy_zpsrwrhzvz9.jpg
    0
  • rufe-snow
    Ex Israeli 98 K. Appears to be the same marking, as on your buttplate. Usually the ex Israeli 98 k's, are also marked on the receiver though. Some prior U.S. owner could have swapped out buttplates.

    Interarms/Golden State, and other arms importers/distributors, imported thousands of 98 K's. From all over in the 50's. Who can say, what Bubba has or has not done to them, in the last 60+ years?




    56izzy.jpg
    0
  • b0400879
    Jetmek:
    Nice pics, & they are well worth the short wait.
    Happy to reply that only the stock is Israeli, & the nice aa block dou 44 barrelled action sitting in it appears to be intact, matching & very likely still chambered in 8x57JS.
    If you could find the correct stock set & bands for it, the restored rifle could be worth some good coin over on the auction side. Not interested myself, but PM if any help is needed w/ it.
    Will also add this: the sling appears orig WW2 German, & the value of these may surprise you.
    Thanks & G' luck.
    0
  • RANGER03
    the picture right above your post "might" indicate a re-chamber to 7.62...

    JMHOP
    0
  • b0400879
    Image is not native to OP's rifle: rufe-snow posted it as an example.

    Somebody needs to pay a little attention .......

    quote:Originally posted by RANGER03
    the picture right above your post "might" indicate a re-chamber to 7.62...

    JMHOP
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?