1911 22 Barrel Identification needed

a429cougar

March 06, 2016 15:09

I am trying to identify a 22 barrel that was in a box of 1911 parts. Is it part of a conversion kit? Is it for something other than a 1911? The last 2 photos I included a 1911 barrel for reference.

[img][/img]
[img][/img]
[img][/img]
[img][/img]
[img][/img]

0

• 

  dcs shooters

  March 06, 2016 15:15

  All that shows is
  
  X
  X
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  All that shows is,
  
  X
  X
  X
  X
  X
  X
  X

  0
• 

  rufe-snow

  March 06, 2016 16:03

  I have a Philippine Armscore, that has some resemblance. But it has a fixed front sight on the barrel.
  
  The machined cuts at the rear left side of the barrel. Is for a ejector. The Armscore has a similar machined cut. With a fixed ejector swaged to the barrel.

  0
• 

  perry shooter

  March 06, 2016 16:28

  That is a barrel with out the floating Chamber as used on the original ACE pistol mostlater units have a Floating chamer same as the conversion units called the SERVICE MODEL conversion units It also take the MILLED ejector and light slide with very light recoil spring
  and a bunch of leather washers to be able to adjust for function with different loadings of 22 LR cartridges Pictures on request or search foe Pre WW II ace pistol M

  0
• 

  a429cougar

  March 06, 2016 17:34

  Thanks Perry Shooter. I would love to see any pics of the barrel and the Milled ejector. I think I have one of the ejectors too. Is the firing pin the same as the later conversion models?

  0
• 

  rufe-snow

  March 06, 2016 18:44

  quote:Originally posted by a429cougar
  Thanks Perry Shooter. I would love to see any pics of the barrel and the Milled ejector. I think I have one of the ejectors too. Is the firing pin the same as the later conversion models?
  
  
  
  
  
  
  
  
  

  0
• 

  perry shooter

  March 06, 2016 18:50

  OK double click on my user name that will allow you to send me a personal email and then I can send pictures direct from my computer To you I don't have but about 5% of my pictures stored on my computer transfered to Photo bucket So cant post directly to you on the forum It will be Tomorrow after I get home from work cheers Karl

  0
• 

  charliemeyer007

  March 06, 2016 18:52

  http://www.shootingillustrated.com/articles/2012/2/1/colt-ace/

  0
• 

  perry shooter

  March 06, 2016 19:12

  the neatest thing is also one of the smallest The firing pin retainer because The 22 LR round is very weak on recoil impulse and the firing pin retainer also Cocks the hammer as the slide starts to cycle.it needs all the help it can get THUS the very weak recoil spring But this spring has to be strong enough to Chamber a new round and close the slide so the firing pin retainer has a small roller held in place crossways in the retainer by an even smaller PIN so instead of the firing pin retainer Sliding up the face of the hammer to cock it
  This roller roles Up the face of the hammer . watch for my follow up pictures after you send me your message Karl you can mount all your parts on a normal 1911 Frame but you have to modify by removing one part The ejector mounted on the frame held on by a small cross pin
  
  EDIT I sent some pictures did you get them

  0
• 

  a429cougar

  March 07, 2016 19:33

  Thanks everyone for all the excellent photos and info.

  0

Please sign in to leave a comment.