Browning SA-22 clone barrel lock disassembly?
I'm having an issue with my Norinco ATD --- the Browning SA-22 clone.
What is the proper way to remove the barrel lock from the barrel lock ring assembly?
I was going to drift it out with a punch but am not sure which direction it goes to release.
Do I strike at the flat area or at the end with the serrations for your thumb?
What I'm trying to do is rebuild the barrel lock mechanism on a reallyl nice 2nd ATD that I got a smoking deal on.
Whoever had it before me must've liked it a lot, they even put a folding Browning rear sight on it.
I already have both springs (adjusting & barrel lock), the adjusting ring follower & barrel lock plunger --- the two detents that go with the springs --- coming from MGW --- I just need some help with the ins & outs of disassembling the barrel lock and setting it back up again.
Here is a pic of the barrel lock ring (courtesy of Brownell's):
http://www.brownells.com/rifle-parts/barrel-parts/rifle-barrel-hardware/barrel-lock-rings/barrel-lock-prod4051.aspx?psize=96&avs|Make~~Model_1=Browning__Semi-Auto+22
And this is the barrel locking ring that it rides in, inside the bottom cut-out:
http://www.brownells.com/rifle-parts/barrel-parts/rifle-barrel-hardware/barrel-lock-rings/barrel-lock-ring-prod4047.aspx?psize=96&avs|Make~~Model_1=Browning__Semi-Auto+22
What is the proper way to remove the barrel lock from the barrel lock ring assembly?
I was going to drift it out with a punch but am not sure which direction it goes to release.
Do I strike at the flat area or at the end with the serrations for your thumb?
What I'm trying to do is rebuild the barrel lock mechanism on a reallyl nice 2nd ATD that I got a smoking deal on.
Whoever had it before me must've liked it a lot, they even put a folding Browning rear sight on it.
I already have both springs (adjusting & barrel lock), the adjusting ring follower & barrel lock plunger --- the two detents that go with the springs --- coming from MGW --- I just need some help with the ins & outs of disassembling the barrel lock and setting it back up again.
Here is a pic of the barrel lock ring (courtesy of Brownell's):
http://www.brownells.com/rifle-parts/barrel-parts/rifle-barrel-hardware/barrel-lock-rings/barrel-lock-prod4051.aspx?psize=96&avs|Make~~Model_1=Browning__Semi-Auto+22
And this is the barrel locking ring that it rides in, inside the bottom cut-out:
http://www.brownells.com/rifle-parts/barrel-parts/rifle-barrel-hardware/barrel-lock-rings/barrel-lock-ring-prod4047.aspx?psize=96&avs|Make~~Model_1=Browning__Semi-Auto+22
0
-
There are a number of disassembly videos on U Tube. Wether they just address simple field stripping, or complete disassembly. I don't know? 0
Please sign in to leave a comment.
Comments
2 comments