Skip to main content
Help Center Community Shop

338-06 test Loads

Comments

4 comments

  • charliemeyer007
    How full is the case? I like full cases, even lightly compressed for hunting loads. I think new barrels need a box of shells to iron in. JB bore paste and a good copper solvent will help.
    0
  • nononsense
    CapnMidnight,

    It's good that you're trying a range of loads since we all know that every rifle is an individual.

    I'm using the 53.5 grain load of H380 which is right to the base of the bullet in that case. It is extremely accurate in my rifle and not over the pressure limit either.

    Other powders to try if you want:

    IMR-4320

    Norma 203B

    Re-17 (favorite)

    Ramshot Big Game (second favorite)

    Best.

    ADDED:

    These are all with the Nosler Partition by the way...

    Best.
    0
  • CapnMidnight
    I'll use the Nosler Patrician or AccuBond to hunt with, figured I'd run these Sierras through it to break the barrel in. Reloader powder is a bit hard to find around here right now, I use Reloader #7 in my Mauser actioned 45-70 with 400gr Barnes SS bullets.
    I'll see how it shoots with the H380, and go from there. I'll post a report and let you know how it preforms.
    Have you tried any 225gr Noslers, how do they shoot, and what load are you using?
    W.D.
    0
  • nononsense
    CapnMidnight,

    I have never had a lick of trouble with any of the weights or calibers when using the Nosler Partitions.

    The 225 Partition has always performed best with IMR-4895 and VVN-540. I did test the H-380 and H-4895 where the 380 out shot the 4895. I suggest starting at 51.0 or a touch less and work your way up.

    Best.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?