cimarron model P jr

saddleshop55

December 13, 2017 14:23

Is a Cimarron Model Pjr strong enough to convert the 32 H&R magnum cylinder to 327 Federal Magnum? Thanks for input.

0

• 

  rufe-snow

  December 13, 2017 14:43

  I would check the length of the cylinder first, before anything else. The 327's OAL, is 1/8" longer than the H & R mag.

  0
• 

  saddleshop55

  December 17, 2017 20:14

  It also comes with a 32-20 cylinder so the length is adequate, I was wondering about the strength of fame etc. Thanks Ken

  0
• 

  charliemeyer007

  December 18, 2017 11:48

  I'd start with looking at the specs for operating pressures and then take into consideration a straight case vs. a bottleneck.
  
  https://en.wikipedia.org/wiki/.327_Federal_Magnum
  https://en.wikipedia.org/wiki/.32-20_Winchester
  
  Your 32 Mag is hotter than the 32-20, the 327 Mag appears to be a lot hotter yet.
  
  Length of the cylinder could be an issue as well the strength. The conversion might stand it for a while and the then shoot loose from the stress. Maybe ask the pistol maker for some guidance.

  0

Please sign in to leave a comment.