Winchester 190 Shroud

victorj19

July 22, 2017 13:30

Bought the gun on the action side and cleaned it up. It was way overdue. Anyway, it is missing the barrel shroud and I would like to buy the correct style. One shroud has a V near the rear sight and the other surrounds the rear sight. SN is B133449xx.

DOM?

I am aware that this rifle is far from being Winchester's better models.

Thanks,

Jim

0

• 

  nmyers

  July 22, 2017 17:08

  I've only seen the stamped steel barrel collar cover. I think that you have to R&R the rear sight.
  
  Be careful, the barrel is pressed fit into the receiver.
  
  Neal

  0
• 

  NeoBlackdog

  July 23, 2017 04:19

  If the rear sight dovetail is 2 1/2" ahead of the receiver you would need the type of collar cover that has the dovetail hole in it.
  http://www.GunBroker.com/item/671078679
  
  If the rear sight dovetail is 3 1/4" ahead of the receiver you would need the collar cover that has the 'V' cut out at the front end.
  (didn't find this one on GB)
  
  From a little research it looks like there is a third type of cover also that is plastic and has the front sight dovetail as part of the cover.

  0
• 

  victorj19

  July 27, 2017 13:48

  Neo,
  
  Thank you
  
  Jim

  0

Please sign in to leave a comment.