Skip to main content
Help Center Community Shop

Clays powder and 38 spl load???

Comments

9 comments

  • Hawk Carse
    Quite common. Hodgdon publishes data.
    0
  • geeguy
    I use Clays all the time. Target load for me is 2.4 grains for a lead 158 gr. SWC. This is a very light load, but it works well. I use Clays on everything from .380-.45ACP for target loads. Lots of data available on line.

    (I don't like Clays for high vel loads, but it can be used)

    Best of luck
    0
  • Krony
    Clays is my favorite for 38 SPL 148gr DEWCs. Have one pound from a few years ago I have been holding back since the supplies of Clays dwindled years ago. Love the way Clays meters, give real consistent loads. If I recall right the burn rate matches closely to Bullseye.
    0
  • noylj
    Clays is OK for almost all handgun cartridges. However, I find it to produce pressure spikes, as does N310 and TiteGroup and prefer "better behaved" powders. Also, Clays seems to have about +/- 0.1gn charge weight range for accuracy. Find Bullseye, Red Dot, AA2, and 231/HP38 to be more versatile.
    0
  • hillbille
    I use unique in all my pistol, shotgun loads. around here anyway it is still fairly easy to find.
    0
  • Krony
    quote:Originally posted by hillbille
    I use unique in all my pistol, shotgun loads. around here anyway it is still fairly easy to find.

    I'm a fan of Unique too, have used it from 9mm to 38 spl to 357 mag...Nice to have a powder you can use across that range.
    0
  • Tflogger
    quote:Originally posted by Krony
    quote:Originally posted by hillbille
    I use unique in all my pistol, shotgun loads. around here anyway it is still fairly easy to find.

    I'm a fan of Unique too, have used it from 9mm to 38 spl to 357 mag...Nice to have a powder you can use across that range.

    yep, if I only had 2 powders they would be Unique and IMR 3031.
    0
  • hillbille
    quote:Originally posted by Tflogger
    quote:Originally posted by Krony
    quote:Originally posted by hillbille
    I use unique in all my pistol, shotgun loads. around here anyway it is still fairly easy to find.

    I'm a fan of Unique too, have used it from 9mm to 38 spl to 357 mag...Nice to have a powder you can use across that range.

    yep, if I only had 2 powders they would be Unique and IMR 3031.



    my only two are unique and Varget,it does all my rifles.
    0

Please sign in to leave a comment.

Recent Activity

Didn’t find what you’re looking for?