Need a screw
Not that kind! I need a screw for a Model 24 Remington .22 semi-auto. It is called the locating hole plug screw Part key #53. I have been unable to locate one. Any ideas? I fixed up the rifle for my wife. shoots great. I am just missing that one screw. Thanks
0
-
There is an early, and late version that take different length screws. Do you know which version you have? 0 -
Thanks for your reply, but I thin I finally found one. It:s the style with the plunger. 0 -
Good luck finding one - small parts that were easily lost or damaged used up the repair stock of parts long ago. If you haven't google Remington model 24 parts, then do so and click on every link, maybe you will get lucky. https://www.gunpartscorp.com/gun-manufacturer/remington/rifles-rem/24
In the past I have such screws. You will need to start with an oversize head so you can turn it down to have a square edge the correct size for the hole. This means the threads will be too large (because of the larger head). so the shank will need to be turned down to the proper size for your correct pitch of threads. It will be much easier to work a longer shank , say 1/2 to 3/4 or more inch long screw. Start with the die in the normal position. Then turn the die around and thread closer to the head. Gun screws are usually extra fine pitch and almost never found at common hardware stores. Cut to length and then warm the part and cold blue it . Hot salts is the proper bluing treatment, you might have a local person or perhaps mail it to outfit.0 -
If you can’t find one through numrich you might try Ace Hardware. They have a section of gun screws in their screw section.
0
Please sign in to leave a comment.
Comments
4 comments