Unnecessary tools
My wife thinks its absolutely rediculous that I own a decimeter.
Sometimes I want to know how loud something really is.
I’m sure some here have a tool or two others may deem “unnecessary”.
What ya got?
This is my decimeter measuring the sound of my 3d printer before I enclosed it.
After the enclosure
-
This thread resembles me.
9 -
operating system
router
earthnet cable
printer
6 -
Don McManus: 30378521876507/comments/
https://forums.gunbroker.com/discussion/comment/11374848#Comment_11374848
Or unnecessary shoes?
Or purses?
Or coats?
0 -
At my age the handiest tool I own is a homemade "cheater bar", I never leave home without it, it's priceless 😊
0 -
Plenty of useless tools in the White house.....
12 -
Oakie: 30378521876507/comments/
How many of you still have your 10mm socket or wrench😣. Yes, I have tools that I only used once, but I do have it, and that is what counts
I went to harbor freight and bought every 10mm wrench and socket they had.. Painted them red and still have one or two.
15 -
Butchdog2: 30378521876507/comments/
No such thing as an unnecessary tool.
I have a timing light and dwell meter, ocassionly use it.
Very true! I have two 50 ton, and three 100 ton porta power cylinders. They are rarely used, but when you need to rare and push the living heck out of something nasty, they will do it, and right now.
3 -
No such thing as an unnecessary tool. I have a shop full of tools my Father in Law left me. I seldom use many of them, but my neighbors often come by to borrow some from time to time. And they have used some to fix my equipment too. So it is always good to have the right tool for the right time even if it sits around gathering dust most of the time......
9 -
for a while, i had a STARRETT [ THE name in micrometers] revolutions micrometer. a little device that had a cone shaped probe that one put into the centering hole of a motor shaft to gauge how fast it was turning. i sold it to an electrician that used it on electric motors to double check the printed operation parameters of a motor.
3 -
I have 2 of those rev meters and still use them now and again.
0 -
Yeah, I've got 10mm sockets and wrenches.
What's the big joke about?
My Dad and his Father owned a Hardware store in the 40's. My Dad had about every tool known to Man. I've got most all of them now. The most cherished are the really old time tools, you just don't run across any more. Chest drills, (elaborate set ups, all the bells and whistles etc.) Wood chisels, old time screw drivers, etc. etc. Doubt my Son will appreciate them the way I do.
No such thing as a useless/unnecessary tool.
3 -
Everything today is 10mm. It doesn't matter if it's built in the USA. Instead of 3/8" & 7/16", they're using 10mm. Probably cause they're importing parts. Good idea to stock up at HF & paint them red.
0 -
Moment of weakness
Two days ago I bought another craftsman
Circular saw with the Lazer and light upgrade lol
It was to cheap to pass up included had the hard plastic case looks like new it was right around 25.00 including shipping with shipping
I know their has to at least 6 may be more in the pole barn similar but hording a trate i have gained after retiting and getting old thats my excuse
along with Hating to pass on it was too much . But I will gift it to one of my sons or inlaws later on This summer
I know battery tools are convenient but ten years from now all my corded tools will work
Provided we still have and not been outlawed to use the electric to use them
0 -
Does a slide rule count? When I was a freshman at Ga. Tech, about half the students there carried a slide rule. It was the mark of a true Ga. Tech nerd to have an embossed leather sheath, about ten inches long, which they wore on their belt, and it contained their slide rule.
About 4,000 of those nerds had those fancy leather slide rule holsters.
I bet there are a lot of slide rules gathering dust these days.
3 -
allen griggs: 30378521876507/comments/
Does a slide rule count? When I was a freshman at Ga. Tech, about half the students there carried a slide rule. It was the mark of a true Ga. Tech nerd to have an embossed leather sheath, about ten inches long, which they wore on their belt, and it contained their slide rule.
About 4,000 of those nerds had those fancy leather slide rule holsters.
I bet there are a lot of slide rules gathering dust these days.
There is at least one regular slide rule with its leather holster around here someplace. Probably buried in a box in a closet along with one of these;
Not sure what brand mine is because I haven't handled it in probably 40 years. I still used it occasionally after pocket calculators came out but I was checking my calculations with a calculator so relegated it to a box in the closet. Now my do everything T.I. calculator has been made obsolete by smart phones. It's progress, I guess. Bob
3 -
The young ones of today would just stare at a slide rule like they were looking at ancient Egyptian Hieroglyphics!
Most couldn't even figure out how to work a dial telephone.
6 -
I did not attain the slide rule stage at Ga. Tech. I had 2 quarters of Algebra and Trig, and I don't think we were supposed to use a slide rule in that class, at least, I never used one.
After 2 long quarters, the Dean said that with my 1.7 GPA it was time to find a new school.
We had 4,300 freshman there in September of my freshman year and 2,500 of us were gone by June.
3 -
I admit the only slide rule I have ever used was a Stanley 25 foot retractable sliding rule
9 -
Just don't say it out loud Frogdog.
0 -
cbxjeff: 30378521876507/comments/
Just don't say it out loud Frogdog.
Haha! Absolutely. That’s a trap for those young dumb husbands. 😁
3 -
Tread easy with the shoes and purses Don. Don't ask me how I know.
0 -
Been there and done that at WI Bobjudy. No calculators/laptops back in the '50's. Show one to my sons and they would think WTF is that?
0 -
How 'bout lead and Okum for doing old plumbing pipes?
6 -
discusdad: 30378521876507/comments/
for a while, i had a STARRETT [ THE name in micrometers] revolutions micrometer. a little device that had a cone shaped probe that one put into the centering hole of a motor shaft to gauge how fast it was turning. i sold it to an electrician that used it on electric motors to double check the printed operation parameters of a motor.
I would never get rid of my cone shaped probe.
0 -
Folks today would try to smoke the okum.😮
6 -
Went looking for a dial indicator & this popped up.
6 -
As I type.......my Post VersaLog, bought in 1966, is about 10 feet away in a bookcase.
Yeah.........it's one of those "forever" items.
3 -
The misfortunes of once knowing how to use such tools as slide rules and such are easily forgotten after long periods of time go by without using them. In other words.....If you don't use it, you lose it!
Same holds true for a lot of things. Like body parts and such! So to quote an old saying I heard a lot during the 60's;
"Keep a cool tool!"
0
Please sign in to leave a comment.
Comments
58 comments