Savage accutrigger replacement with Timney

danielgage

November 21, 2023 15:19

OK I need so help

I have a Timney replacement trigger in my Savage Arms 110 Ultralite when I shot it, it shot fine but when I worked the bolt and put another round in the barrel it fired !!!

what needs to be done to fix this?

this is what Timney said

The pull weight is too low and will cause a slam fire.  You will need to adjust the pull 
weight screw at the back of the trigger to create more tension on the trigger.  It could 
also be that the sear is not properly engaged.  I would go through the install 
instructions again if you are experiencing slam fires.
Slam firing is usually caused by too little tension on the trigger  - the pull weight is 
too light.  I would go through the install again - it is also possible that the sear and 
safety are not engaged properly.  You can always call us for help to troubleshoot this as 
well

0

• 

  toad67

  November 21, 2023 16:02

  Sounds like it didn't quite set the sear. I'd call Timney to start with, probably will have to adjust the screw.

  6

Please sign in to leave a comment.